1. Bitte immer die Rechnerkonfiguration komplett posten!
    Vollständige Angaben zur Konfiguration erleichtern die Hilfestellung und machen eine zügige Problemlösung wahrscheinlicher. Wie es geht steht hier: Klick.
    Information ausblenden

HP Deskjet 930C druckt imma ne Testseite

Dieses Thema im Forum "Multifunktionsgeräte, Drucker, Scanner" wurde erstellt von Myu, 17. Juni 2002.

Status des Themas:
Es sind keine weiteren Antworten möglich.
  1. Myu

    Myu ROM

    Registriert seit:
    17. Juni 2002
    Beiträge:
    1
    also, drucken tut er ja vernünftig, aber immer wenn der Ausdruck beendet is, zieht er gleich en neues Blatt ein un druckt ne Testseite... mit diesesn Test-Farbstreifen usw.
    Woran kann das liegen? Ich brech immer ab, bevor er das Blatt einziehn kann, aba das is en bissl nervig...
     
  2. tigercat

    tigercat Byte

    Registriert seit:
    25. September 2000
    Beiträge:
    31
    ll say c:\dj937.
    2. Change directory to c:\dj937.
    3. Download the driver to c:\dj937.
    4. Double-click on the exe that you just downloaded. This will extract the files.
    5. You will see a 3-letter language directory. For example, if you
    downloaded the English driver, you will see a directory enu under
    c:\dj937.
    6. Before you install this software, you must set up the printer by
    plugging in the electrical power cord and loading white paper. Then turn on the printer and insert the print cartridges. Before you connect the USB cable, close any open programs running on your computer.
    7. Now connect the USB cable. You will see a New Hardware Found Wizard dialog box with the DeskJet 930 printer listed.
    a. Click Next.
    b. Select Search and click Next.
    c. In the next screen, check Specify a Location and click Browse. Do not click Next.
    d. Double-click on the drive where you downloaded the driver files (in the example c:\dj937) and locate the <3 letter language code>\9x\disk1 directory.
    e. Double-click on the DISK1 folder.
    f. Point to the WIN98USB folder, and click OK.
    If the New Hardware Found Wizard dialog box does not appear after you plug in the USB cable, see Frequently Asked Questions about USB in your printer\'s User Guide for Windows.

    If you need further assistance, please reply to this message. You
    may also find technical and troubleshooting information along with
    software updates, on our HP Customer Care web site at

    http://www.hp.com/cposupport/eschome.html

    Best regards,
    Terry
    HP Customer Solutions Team

    * Our advice is strictly limited to the question(s) asked and is
    based on the information provided to us. Problems and solutions
    may depend on the nature of your system environment and various other parameters that are unknown to HP; therefore, HP cannot assume any responsibility or liability. Please be advised that technical information changes as new data becomes available, therefore, HP recommends that you regularly check our Customer Care Web site for possible updates at:

    http://www.hp.com/go/support

    HP shall not be liable for any direct, indirect, special, incidental
    or consequential damages in connection with the use of this
    information.
     
Status des Themas:
Es sind keine weiteren Antworten möglich.

Diese Seite empfehlen