Probleme WLAN mit INTEL(R) PRO/Wireless LAN 2100 3A Mini PCI Adapter

Dieses Thema im Forum "Linux-Distributionen" wurde erstellt von bhuelseb, 15. November 2005.

Status des Themas:
Es sind keine weiteren Antworten möglich.
  1. bhuelseb

    bhuelseb ROM

    Registriert seit:
    15. November 2005
    Beiträge:
    2
    Hallo,
    habe mir als auf meinem Notebook parallel zu Windows auf einer weiteren Partition Linux 10 installiert. Klappt alles prima - nur das WLAN kriege ich mit WPA-PSK nicht zum Laufen (unverschlüsselt funktioniert's). Ich habe die aktuelle Version NdisWrapper 1.5 nach Anweisung von http://sourceforge.net/projects/ndiswrapper/mediawiki/ sowie den entsprechenden Windows-Treiber(w70n51.inf) installiert.

    WLAN-Karte :
    INTEL(R) PRO/Wireless LAN 2100 3A Mini PCI Adapter

    NdisWrapper-Version 1.5 von
    http://sourceforge.net/projects/ndiswrapper/mediawiki/
    Bei Eingabe der nachfolgenden Befehle :

    • ifconfig eth1 up
    • wpa_supplicant -Dndiswrapper -ieth1 -c/etc/wpa_supplicant.conf -dd

    erhalte ich folgende Log-Einträge:

    Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'ndiswrapper'
    Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
    Reading configuration file '/etc/wpa_supplicant.conf'
    ctrl_interface='/var/run/wpa_supplicant'
    ctrl_interface_group=0
    eapol_version=1
    ap_scan=1
    fast_reauth=1
    Line: 271 - start of a new network block
    ssid - hexdump_ascii(len=8):
    31 39 31 31 32 30 30 32 19112002
    PSK (ASCII passphrase) - hexdump_ascii(len=12): [REMOVED]
    priority=5 (0x5)
    PSK (from passphrase) - hexdump(len=32): [REMOVED]
    Priority group 5
    id=0 ssid='19112002'
    Initializing interface (2) 'eth1'
    EAPOL: SUPP_PAE entering state DISCONNECTED
    EAPOL: KEY_RX entering state NO_KEY_RECEIVE
    EAPOL: SUPP_BE entering state INITIALIZE
    EAP: EAP entering state DISABLED
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    ioctl[SIOCSIWPMKSA]: Operation not supported
    SIOCGIWRANGE: WE(compiled)=18 WE(source)=16 enc_capa=0x0
    capabilities: key_mgmt 0x0 enc 0x3
    Own MAC address: 00:0c:f1:3a:69:83
    Setting scan request: 0 sec 100000 usec
    Using existing control interface directory.
    Wireless event: cmd=0x8b06 len=8
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan timeout - try to get results
    Received 684 bytes of scan results (3 BSSes)
    Scan results: 3
    Selecting BSS from priority group 5
    0: 00:01:e3:52:9f:6d ssid='19112002' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected
    Trying to associate with 00:01:e3:52:9f:6d (SSID='19112002' freq=0 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Authentication with 00:00:00:00:00:00 timed out.
    Added BSSID 00:00:00:00:00:00 into blacklist
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Scan timeout - try to get results
    Received 891 bytes of scan results (4 BSSes)
    Scan results: 4
    Selecting BSS from priority group 5
    0: 00:01:e3:52:9f:6d ssid='19112002' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected
    Trying to associate with 00:01:e3:52:9f:6d (SSID='19112002' freq=0 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 2
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan timeout - try to get results
    Received 893 bytes of scan results (4 BSSes)
    Scan results: 4
    Selecting BSS from priority group 5
    0: 00:01:e3:52:9f:6d ssid='19112002' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected
    Trying to associate with 00:01:e3:52:9f:6d (SSID='19112002' freq=0 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 3
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Scan timeout - try to get results
    Received 685 bytes of scan results (3 BSSes)
    Scan results: 3
    Selecting BSS from priority group 5
    0: 00:01:e3:52:9f:6d ssid='19112002' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected
    Trying to associate with 00:01:e3:52:9f:6d (SSID='19112002' freq=0 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 4
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Scan timeout - try to get results
    Received 685 bytes of scan results (3 BSSes)
    Scan results: 3
    Selecting BSS from priority group 5
    0: 00:01:e3:52:9f:6d ssid='19112002' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected
    Trying to associate with 00:01:e3:52:9f:6d (SSID='19112002' freq=0 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Wireless event: cmd=0x8b06 len=8
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 5
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Wireless event: cmd=0x8b1a len=21
    Scan timeout - try to get results
    Received 684 bytes of scan results (3 BSSes)
    Scan results: 3
    Selecting BSS from priority group 5
    0: 00:01:e3:52:9f:6d ssid='19112002' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected
    Trying to associate with 00:01:e3:52:9f:6d (SSID='19112002' freq=0 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 6
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Scan timeout - try to get results
    Received 892 bytes of scan results (4 BSSes)
    Scan results: 4
    Selecting BSS from priority group 5
    0: 00:01:e3:52:9f:6d ssid='19112002' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected
    Trying to associate with 00:01:e3:52:9f:6d (SSID='19112002' freq=0 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 7
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan timeout - try to get results
    Received 894 bytes of scan results (4 BSSes)
    Scan results: 4
    Selecting BSS from priority group 5
    0: 00:01:e3:52:9f:6d ssid='19112002' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected
    Trying to associate with 00:01:e3:52:9f:6d (SSID='19112002' freq=0 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 8
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Scan timeout - try to get results
    Received 892 bytes of scan results (4 BSSes)
    Scan results: 4
    Selecting BSS from priority group 5
    0: 00:01:e3:52:9f:6d ssid='19112002' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected
    Trying to associate with 00:01:e3:52:9f:6d (SSID='19112002' freq=0 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 9
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan timeout - try to get results
    Received 682 bytes of scan results (3 BSSes)
    Scan results: 3
    Selecting BSS from priority group 5
    0: 00:01:e3:52:9f:6d ssid='19112002' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected
    Trying to associate with 00:01:e3:52:9f:6d (SSID='19112002' freq=0 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 10
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Scan timeout - try to get results
    Received 684 bytes of scan results (3 BSSes)
    Scan results: 3
    Selecting BSS from priority group 5
    0: 00:01:e3:52:9f:6d ssid='19112002' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected
    Trying to associate with 00:01:e3:52:9f:6d (SSID='19112002' freq=0 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 11
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan timeout - try to get results
    Received 893 bytes of scan results (4 BSSes)
    Scan results: 4
    Selecting BSS from priority group 5
    0: 00:01:e3:52:9f:6d ssid='19112002' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected
    Trying to associate with 00:01:e3:52:9f:6d (SSID='19112002' freq=0 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 12
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Wireless event: cmd=0x8b06 len=8
    Wireless event: cmd=0x8b1a len=21
    Scan timeout - try to get results
    Received 893 bytes of scan results (4 BSSes)
    Scan results: 4
    Selecting BSS from priority group 5
    0: 00:01:e3:52:9f:6d ssid='19112002' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected
    Trying to associate with 00:01:e3:52:9f:6d (SSID='19112002' freq=0 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    No keys have been configured - skip key clearing
    Removed BSSID 00:00:00:00:00:00 from blacklist (clear)

    Kann mir als Linux-Newbie jemand helfen ??

    Danke...
     
  2. charlymcfly

    charlymcfly ROM

    Registriert seit:
    16. November 2005
    Beiträge:
    7
    Nach dem Überfliegen deiner Lgs und der aussage das es unverschlüsselt funktioniert ist deine Verschlüsselung falsch eingestellt oder vielleicht hast auc einfach nur den schlüssel falsch eingegeben.
     
  3. bhuelseb

    bhuelseb ROM

    Registriert seit:
    15. November 2005
    Beiträge:
    2
    Hallo,
    danke für Deine Antwort. Der Schlüssel müsste in Ordnung sein, da das Ganze mit Windows XP und ESSID/Schlüssel funktioniert. Wie müsste man denn die Verschlüsselung einstellen ? Habe folgende Einstellung in /etc/wpa_supplicant.conf gewählt:

    network={
    ssid="19112002"
    psk="mein_passwort_in_klartext"
    key_mgmt=WPA-PSK
    proto=WPA
    }
    Gruss, Bernd
     
Status des Themas:
Es sind keine weiteren Antworten möglich.

Diese Seite empfehlen