1. Bitte immer die Rechnerkonfiguration komplett posten!
    Vollständige Angaben zur Konfiguration erleichtern die Hilfestellung und machen eine zügige Problemlösung wahrscheinlicher. Wie es geht steht hier: Klick.
    Information ausblenden

ram im bios richtig einstellen

Dieses Thema im Forum "CPU, BIOS & Motherboards, RAM" wurde erstellt von Holle3333, 23. Mai 2005.

Status des Themas:
Es sind keine weiteren Antworten möglich.
  1. Holle3333

    Holle3333 Byte

    Registriert seit:
    29. März 2004
    Beiträge:
    125
    Hallo Leute , wie stelle ich meinen Ram im bios richtig ein ??
    Hier meine Daten :
    SiSoftware Sandra

    System
    Manufacturer : MSI
    Model : MS-6380E
    Version : 1.0
    Serial Number : 00000000
    ID : 00000000-00000000-00000000-00000000

    System Chassis
    Manufacturer : Uknown Chassis Manufacture
    Type : Desktop
    Can be locked : No
    Version : Version 1.00
    Serial Number : 123456890
    Asset Tag : 0123ABC

    Mainboard
    Manufacturer : MSI
    MP Support : 1 CPU(s)
    MPS Version : 1.40
    Model : MS-6380E
    Version : 1.0
    Serial Number : 00000000

    Memory Controller
    Error Detection Method : ECC
    Error Correction Capability : 1-bit
    Supported/Current Memory Interleave : 1-way / 1-way
    Number of Memory Slots : 3
    Maximum Installable Memory : 3072MB
    Maximum Module Size : 1024MB
    Supported STD/FPM/(B)EDO Speeds : 70ns, 60ns
    Supported Memory Types : STD, FPM, EDO, Parity, ECC, SIMM
    Supported Memory Voltages : +3.3V

    Physical/BIOS Memory Banks
    DIMM1 (RASL-1 RASL-0) : 256MB DIMM SDRAM single-bank
    DIMM2 (RASL-3 RASL-2) : 256MB DIMM SDRAM single-bank
    DIMM3 (RASL-5 RASL-4) : 512MB DIMM SDRAM double-bank

    Chipset 1
    Model : VIA Technologies Inc VT8366/A,VT8367 Apollo KT266/A,KT333 CPU to PCI Bridge
    Bus(es) : ISA AGP PCI IMB USB i2c/SMBus
    Front Side Bus Speed : 2x 133MHz (266MHz data rate)
    Maximum FSB Speed / Max Memory Speed : 2x 166MHz / 2x 166MHz
    Width : 64-bit
    IO Queue Depth : 4 request(s)

    Chipset 1 Hub Interface
    Type : V-Link
    Width : 8-bit
    Full Duplex : Yes
    Multiplier : 1/1x
    Speed : 4x 66MHz (264MHz data rate)
    IO Queue Depth : 9 request(s)

    Logical/Chipset 1 Memory Banks
    Bank 0 : 256MB DDR-SDRAM 2.5-3-3-7CL 2CMD
    Bank 2 : 256MB DDR-SDRAM 2.5-3-3-7CL 2CMD
    Bank 4 : 256MB DDR-SDRAM 2.5-3-3-7CL 2CMD
    Bank 5 : 256MB DDR-SDRAM 2.5-3-3-7CL 2CMD
    Speed : 2x 166MHz (332MHz data rate)
    Multiplier : 5/4x
    Width : 64-bit
    Power Save Mode : No
    Fixed Hole Present : No

    APIC 1
    Version : 0.03
    Speed : 16MHz
    Multiplier : 1/2x
    Maximum Interrupts : 24
    IRQ Handler Engaged : Yes
    Enhanced Support : Yes

    Memory Module(s)
    Memory Module 1 : 256MB 8x(32Mx8) DDR-SDRAM PC2700U-2533-700 (CL2.5 up to 167MHz) (CL2 up to 133MHz)
    Memory Module 2 : 256MB 8x(32Mx8) DDR-SDRAM PC2700U-2533-700 (CL2.5 up to 167MHz)
    Memory Module 3 : Siemens 64D64320GU5B 0200EB11 512MB 16x(32Mx8) DDR-SDRAM PC3200U-333-500 (CL3 up to 200MHz) (CL2.5 up to 167MHz) (CL2 up to 133MHz)

    System Clock Generator
    Model : ICS 94228
    Software Programmable : Yes
    Read-Back Support : Yes
    Speed Selected By : Software
    Spread Spectrum Modulated : Yes
    Number of FSB Speeds : 32
    FSB Speed Range : 67 - 233MHz

    Environment Monitor 1
    Model : Winbond W83697HF ISA
    Version : 6.00
    Mainboard Specific Support : No

    Temperature Sensor(s)
    Board Temperature : 37.0°C / 98.6°F
    CPU Temperature : 40.5°C / 104.9°F

    Cooling Device(s)
    Auto Fan Speed Control : No
    Chassis Fan Speed : 2860rpm
    CPU Fan Speed : 1740rpm

    Voltage Sensor(s)
    CPU Voltage : 1.58V
    +3.3V Voltage : 3.23V
    +5V Voltage : 4.97V
    +12V Voltage : 12.34V
    -12V Voltage : -11.87V
    -5V Voltage : -5.10V
    Standby Voltage : 4.97V
    Battery Voltage : 3.39V

    AGP Bus(es) on Hub 1
    Version : 2.00
    Speed : 4x 66MHz (264MHz data rate)
    Multiplier : 1/2x
    Fast-Writes Enabled : No
    Side Band Enabled : Yes
    Aperture Size : 128MB

    PCI Bus(es) on Hub 1
    Version : 2.10
    Number of Bridges : 1
    PCI Bus 0 : PCI (33MHz)
    Multiplier : 1/4x

    LPC Hub Controller 1
    Model : VIA Technologies Inc VT8235 PCI to ISA Bridge
    ACPI Power Management Enabled : Yes
    Multiplier : 1/4x
    Speed : 8MHz
    DMA Multiplier : 1/2x
    DMA Speed : 4MHz

    USB Controller 1
    Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
    Version : 1.10
    Interface : UHCI
    Channels : 2
    Speed : 48MHz
    Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
    Legacy Emulation Enabled : No

    USB Controller 2
    Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
    Version : 1.10
    Interface : UHCI
    Channels : 2
    Speed : 48MHz
    Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
    Legacy Emulation Enabled : No

    USB Controller 3
    Model : VIA Technologies Inc VT6202 USB 2.0 Enhanced Host Controller
    Version : 2.00
    Specification : 1.00
    Interface : EHCI
    Channels : 4
    Companion Controllers : 2
    Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
    Addressing Support : 32-bit
    Legacy Emulation Enabled : No

    System SMBus Controller 1
    Model : VIA VT823x SMBus
    Advanced TCO Mode Enabled : No
    Slave Device Enabled : No
    PEC Support : No
    Speed : 16kHz

    Expansion Slot(s)
    PCI1 (1h) : PCI 32-bit +3.3V Shared PME Full-Length Available (VIA Technologies Inc VT8366/A,VT8367 Apollo KT266/A,KT333 PCI to AGP Bridge)
    PCI2 (2h) : PCI 32-bit +3.3V Shared PME Full-Length Used
    PCI3 (3h) : PCI 32-bit +3.3V Shared PME Full-Length Used
    PCI4 (4h) : PCI 32-bit +3.3V Shared PME Full-Length Available
    PCI5 (5h) : PCI 32-bit +3.3V Shared PME Full-Length Available
    AGP (3h) : AGP-4x 32-bit +3.3V Shared PME Full-Length Used

    Port Connector
    USB - Def : SSA SCSI - Mini Centronics / DB-25 pin male

    Performance Tips
    Notice 224 : SMBIOS/DMI information may be inaccurate.
    Warning 2508 : All memory slots are full. Upgrading the memory may be difficult or expensive.
    Warning 2545 : Large memory modules should be Registered/Buffered.
    Tip 2546 : Large memory modules should be ECC/Parity.
    Tip 2548 : Speed set by software. For reliability, consider by jumpers/switch.
    Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
    Warning 2519 : One of the system fans has failed or is spinning too slowly.


    Habe da Optionen wie , spd, hlkc und so weiter
    Wie ist es am besten ???
    Gruss
    Holle
     
Status des Themas:
Es sind keine weiteren Antworten möglich.

Diese Seite empfehlen