1. Bitte immer die Rechnerkonfiguration komplett posten!
    Vollständige Angaben zur Konfiguration erleichtern die Hilfestellung und machen eine zügige Problemlösung wahrscheinlicher. Wie es geht steht hier: Klick.
    Dismiss Notice
  2. Liebe Forumsgemeinde,

    aufgrund der Bestimmungen, die sich aus der DSGVO ergeben, müssten umfangreiche Anpassungen am Forum vorgenommen werden, die sich für uns nicht wirtschaftlich abbilden lassen. Daher haben wir uns entschlossen, das Forum in seiner aktuellen Form zu archivieren und online bereit zu stellen, jedoch keine Neuanmeldungen oder neuen Kommentare mehr zuzulassen. So ist sichergestellt, dass das gesammelte Wissen nicht verloren geht, und wir die Seite dennoch DSGVO-konform zur Verfügung stellen können.
    Dies wird in den nächsten Tagen umgesetzt.

    Ich danke allen, die sich in den letzten Jahren für Hilfesuchende und auch für das Forum selbst engagiert haben. Ich bin weiterhin für euch erreichbar unter tti(bei)pcwelt.de.
    Dismiss Notice
Ergänzung Rechnerkonfiguration Wir stellen um auf Read only

S.M.A.R.T Fehler! Wer kann mit bitte helfen?

Discussion in 'Festplatten, SSD, USB-Sticks, CD/DVD/Blu-ray' started by alfa100, Jun 19, 2009.

Thread Status:
Not open for further replies.
  1. alfa100

    alfa100 ROM

    Hallo!
    Habe soeben mit S.M.A.R.T meine Festplatte geprüft nun bitte ich um
    Hilfe bei der Fehlersuche:

    BS - Debian 4.0
    Festplatte: MAXTOR 160GB

    Mit
    Code:
    smartctl -a /dev/hda
    bekomme ich folgendes:

    Code:
    smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     MAXTOR STM3160215A
Serial Number:    9RA35KDX
Firmware Version: 3.AAD
User Capacity:    160.041.885.696 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Fri Jun 19 09:19:27 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 430) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  54) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   114   092   006    Pre-fail  Always       -       60935296
  3 Spin_Up_Time            0x0003   098   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       795
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   084   060   030    Pre-fail  Always       -       252166464
  9 Power_On_Hours          0x0032   091   091   000    Old_age   Always       -       8528
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       890
187 Unknown_Attribute       0x0032   088   088   000    Old_age   Always       -       12
189 Unknown_Attribute       0x003a   100   100   000    Old_age   Always       -       0
190 Unknown_Attribute       0x0022   062   048   045    Old_age   Always       -       722993190
194 Temperature_Celsius     0x0022   038   052   000    Old_age   Always       -       38 (Lifetime Min/Max 0/14)
195 Hardware_ECC_Recovered  0x001a   048   046   000    Old_age   Always       -       7592524
197 Current_Pending_Sector  0x0012   001   001   000    Old_age   Always       -       4294967295
198 Offline_Uncorrectable   0x0010   001   001   000    Old_age   Offline      -       4294967295
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 103 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 103 occurred at disk power-on lifetime: 794 hours (33 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 e0  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 78 3e bc 20 e0 00      03:15:03.579  READ DMA EXT
  25 00 08 8e 68 1f e0 00      03:15:03.563  READ DMA EXT
  25 00 08 2e db 1e e0 00      03:15:03.553  READ DMA EXT
  25 00 08 1e ba 1e e0 00      03:15:03.494  READ DMA EXT
  25 00 20 66 b8 1e e0 00      03:15:03.483  READ DMA EXT

Error 102 occurred at disk power-on lifetime: 794 hours (33 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 e0  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 cf 97 07 e0 00      03:14:55.346  READ DMA EXT
  25 00 08 4f 99 07 e0 00      03:14:55.346  READ DMA EXT
  25 00 08 c6 a6 79 e0 00      03:14:55.346  READ DMA EXT
  25 00 08 b6 a5 77 e0 00      03:14:55.345  READ DMA EXT
  25 00 08 0e a8 79 e0 00      03:14:55.477  READ DMA EXT

Error 101 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 6d d2 6c 00 e0  Error: UNC at LBA = 0x00006cd2 = 27858

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 80 bf 6c 00 e0 00      00:11:27.001  READ VERIFY SECTOR(S)
  40 00 80 3f 6c 00 e0 00      00:11:26.993  READ VERIFY SECTOR(S)
  40 00 00 3f 6d 00 e0 00      00:11:26.971  READ VERIFY SECTOR(S)
  40 00 00 3f 6c 00 e0 00      00:11:39.791  READ VERIFY SECTOR(S)
  40 00 00 3f 6b 00 e0 00      00:11:39.785  READ VERIFY SECTOR(S)

Error 100 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 6d d2 6c 00 e0  Error: UNC at LBA = 0x00006cd2 = 27858

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 00 3f 6c 00 e0 00      00:11:27.001  READ VERIFY SECTOR(S)
  40 00 00 3f 6b 00 e0 00      00:11:26.993  READ VERIFY SECTOR(S)
  40 00 00 3f 6a 00 e0 00      00:11:26.971  READ VERIFY SECTOR(S)
  40 00 01 ca 68 00 e0 00      00:11:24.432  READ VERIFY SECTOR(S)
  40 00 01 c9 68 00 e0 00      00:11:24.409  READ VERIFY SECTOR(S)

Error 99 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 c9 68 00 e0  Error: UNC at LBA = 0x000068c9 = 26825

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 01 c9 68 00 e0 00      00:11:27.001  READ VERIFY SECTOR(S)
  40 00 02 c9 68 00 e0 00      00:11:26.993  READ VERIFY SECTOR(S)
  40 00 02 c7 68 00 e0 00      00:11:26.971  READ VERIFY SECTOR(S)
  40 00 04 cb 68 00 e0 00      00:11:24.432  READ VERIFY SECTOR(S)
  40 00 04 c7 68 00 e0 00      00:11:24.409  READ VERIFY SECTOR(S)

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      8528         -
# 2  Short offline       Completed without error       00%      8527         -
# 3  Short offline       Completed without error       00%      8526         -
# 4  Extended offline    Aborted by host               80%      8526         -
# 5  Short offline       Completed without error       00%      8526         -
# 6  Short offline       Completed without error       00%      6430         -
# 7  Short offline       Completed without error       00%      6430         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
    Wenn kein Fehler währe dann hätte ich unter

    Code:
    SMART Error Log Version: 1
No Errors Logged
    Ich bekomme aber einige Errors.
    Was sind das für Fehler?

    Danke
     
    alfa100, Jun 19, 2009
    #1
  2. Hnas2

    Hnas2 Ganzes Gigabyte

    Warum benutzt du nicht das für diese Festplatte vorgesehene Programm "Powermax"?
     
    Hnas2, Jun 19, 2009
    #2
  3. deoroller

    deoroller Wandelndes Forum

    deoroller, Jun 19, 2009
    #3
  4. alfa100

    alfa100 ROM

    Zuerst vielen Dank für euere Antworten.

    @Hnas2
    Powermax hat keine Fehler gefunden.

    @deoroller
    Gestern wollte der PC nicht booten.
    Die Festplatte wurde nicht erkannt.
    Die Festplatte ist im Wechselramen eingebaut.
    Erst nach mehreren Versuchen wurde die Festplatte erkannt.
    Heute habe ich den Wechselramen rausgezogen und wieder reingeschoben und der PC hat gebootet.

    Ich vermute dass der Fehler im Wechselramen ist.
     
    alfa100, Jun 19, 2009
    #4
  5. deoroller

    deoroller Wandelndes Forum

    Controllerfehler und defekte Datenkabel können die UltraDMA CRC Fehler im Smart erhöhen, was bei deiner Platte aber nicht der Fall ist.
     
    deoroller, Jun 19, 2009
    #5
Thread Status:
Not open for further replies.

Share This Page